* Format the phone before trying to flash the file(s) again * Consider using the latest version of Sp Flash tool * If that doesn’t work, keep holding down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase, power + volume decrease or power + volume increase). * Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing. * Delete the sp flash tool folder then re-extract Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install. * Probably have the wrong driver installed. * Ensure you tick the boxes for only the files present in the ROM you’re about to flash * Ensure that the file(s) you’re trying to flash are actually for your exact phone model Meaning: The firmware you’re trying to flash is either not compatible with your device or you have selected the wrong flashing settings Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) Enable DRAM fail * If that doesn’t work, open the scatter file using Notepad++ and change _NODL_FAT to FAT by removing “_NODL_”. * If that isn’t feasible, try formatting first or use firmware upgrade * If the MTK backup contains more than one scatter file, retry flashing with the other scatter file. * If Download doesnt work then do a firmware upgrade * Format the phone in SP flash tool (Do not format Bootloader) then try flashing the files again using Download Meaning: SP Flash tool is having trouble writing to certain partitions due to some incompatibility Message: Error 8038! Android download pmt is ready and layout has been changed If you’re certain it wasn’t, try a higher version of SP Flash tool * Ensure the scatter file wasn’t renamed. Meaning: SP Flash tool doesn’t accept the name format of your scatter file Please check the scatter file name you load is legal Message: Error: Initialize scatter file failed. If you’re sure they are, then try formatting before flashing again Meaning: The files you’re trying to flash do not belong to or are not compatible with the phone you’re trying to flash them to Message: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |